{"title":"Industrial \u0026 Hydraulic Oils","description":"\u003cp\u003eIndustrial lubricants cover a wide range of equipment, from hydraulic presses and excavators to compressors, chillers and food processing lines. The right fluid depends on the system type, operating temperature and the standards the equipment maker defines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHydraulic oils.\u003c\/strong\u003e Most mineral hydraulic oils are classified under ISO 6743 as HL, HM (also written HLP) or HV (HVLP). HM oils add anti-wear additives for pumps under load. HV oils add viscosity-index improvers so the oil stays stable across a wide temperature range, which suits mobile equipment working outdoors. The ISO VG number, for instance VG 46 or VG 68, is the viscosity in centistokes at 40 degrees Celsius and should match the pump manufacturer's recommendation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFood-grade lubricants.\u003c\/strong\u003e Where incidental contact with food is possible, equipment owners typically look for lubricants registered for that use, such as NSF H1. Check the registration on the product data sheet instead of assuming it from the product type.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRefrigeration oils.\u003c\/strong\u003e Compressor oils must be compatible with the refrigerant in the system. Mineral, alkylbenzene, POE and PAG oils are not interchangeable, so confirm the type with the compressor maker before topping up or changing.\u003c\/p\u003e\n\u003cp\u003eNever mix different fluid families without confirming compatibility, keep containers sealed to avoid moisture and dirt, and follow the drain interval in the equipment manual. Browse the range below and compare viscosity grade and specification on each product page.\u003c\/p\u003e","products":[{"product_id":"dco-vhlp-hvi-iso-vg-46","title":"DCO VHLP (HVI) ISO-VG 46","description":"\u003ch2\u003eISO VG 46 hydraulic oil for wide temperature swings\u003c\/h2\u003e\n\u003cp\u003eDCO VHLP HVI, in grade ISO-VG 46, is a hydraulic oil with a high viscosity index of 152. Because the viscosity changes relatively little between cold and warm conditions, it suits outdoor machinery and installations that see large temperature differences over a day or a season.\u003c\/p\u003e\n\u003cp\u003eThe additive package targets wear, corrosion and rust, and keeps foaming and ageing in check. The oil also separates water well, so small amounts of moisture hardly affect how easily it filters.\u003c\/p\u003e\n\u003ch3\u003eKey data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eViscosity 46.4 cSt at 40 °C and 8.2 cSt at 100 °C\u003c\/li\u003e\n\u003cli\u003eDensity 0.860 kg\/l at 20 °C\u003c\/li\u003e\n\u003cli\u003eFlash point (COC) 213 °C, pour point -33 °C\u003c\/li\u003e\n\u003cli\u003eSulphated ash 0.15%, TAN 0.9 mg KOH\/g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStandards and builder requirements (per manufacturer)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDIN 51524 part 3 (HVLP), ISO L-HV, AFNOR NF E 48603 (HV), VDMA 24318\u003c\/li\u003e\n\u003cli\u003eVickers M-2950-S and I-286-S\u003c\/li\u003e\n\u003cli\u003eCincinnati Milacron P68, P69 and P70 (matching the ISO VG 32, 46 and 68 grades, in that order)\u003c\/li\u003e\n\u003cli\u003eThyssen TH-N-256132 and US Steel 126\/127\u003c\/li\u003e\n\u003cli\u003eFZG A\/8.3\/90 above stage 12 for ISO VG 46 and 68\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoosing the right oil\u003c\/h3\u003e\n\u003cp\u003eChoose this grade when the machine builder asks for an HVLP\/HV oil of ISO VG 46, for instance on excavators, presses or mobile equipment working outside in changing weather. Check the viscosity grade and the approval list in the machine manual before topping up or switching, and do not mix with other hydraulic oils unless the maker allows it.\u003c\/p\u003e","brand":"FYOIL","offers":[{"title":"60L","offer_id":52349706076424,"sku":"E900011-60","price":224.95,"currency_code":"EUR","in_stock":true},{"title":"210L","offer_id":52349706109192,"sku":"E900011-210","price":635.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/9232\/7944\/files\/hvi_vhlp_iso-vg_46-60l.webp?v=1756994243"},{"product_id":"petronas-frigor-m-4","title":"PETRONAS FRIGOR M 4","description":"\u003ch2\u003eA naphthenic refrigeration oil with a low pour point\u003c\/h2\u003e\n\u003cp\u003ePETRONAS Frigor M4 is a naphthenic compressor oil for refrigeration systems. It is intended for HCFC and CFC refrigerants (R12, R22 and R502), ammonia (R717) and hydrocarbons such as R290 and R600a. It serves commercial as well as industrial installations.\u003c\/p\u003e\n\u003cp\u003eThe refined naphthenic base oil has a low pour point and very little wax, so it stays fluid at low temperatures and avoids problems in the cold parts of the circuit. At the same time it stays stable when hot, which limits deposits and sludge and extends the life of the oil and the system.\u003c\/p\u003e\n\u003ch3\u003eWhere it is used\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHermetic, semi-hermetic and open compressors\u003c\/li\u003e\n\u003cli\u003eHousehold and commercial refrigeration\u003c\/li\u003e\n\u003cli\u003eSystems running on ammonia, HC, HCFC or CFC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDensity 0.905 g\/cm³ at 15 °C\u003c\/li\u003e\n\u003cli\u003eViscosity 56.0 cSt at 40 °C, 6.3 cSt at 100 °C\u003c\/li\u003e\n\u003cli\u003ePour point -37 °C, flash point 193 °C\u003c\/li\u003e\n\u003cli\u003eFloc point -48 °C (ASHRAE 86)\u003c\/li\u003e\n\u003cli\u003eTotal acid number below 0.01 mg KOH\/g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoosing the right oil\u003c\/h3\u003e\n\u003cp\u003eMatch the oil to the refrigerant and the compressor maker's requirement before topping up or changing. Do not mix refrigeration oils of different types, and drain and refill when changing the oil type.\u003c\/p\u003e\n\u003cp\u003eData sheets: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/9232\/7944\/files\/79679_PDS_nl-EU_20250109.pdf?v=1756994456\"\u003ePDS\u003c\/a\u003e and \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/9232\/7944\/files\/79679_SDS_nl-EU_20241026.pdf?v=1756994457\"\u003eMSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Petronas","offers":[{"title":"3.78L","offer_id":52350026449160,"sku":"79679J23EU-1","price":45.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/9232\/7944\/files\/petronas_frigor_m4_3.78l_transparent.webp?v=1757053892"},{"product_id":"q8-wagner-nst-68","title":"Q8 Wagner NST 68","description":"\u003ch2 data-start=\"239\" data-end=\"285\"\u003eHigh-quality slideway oil\u003c\/h2\u003e\n\u003cp data-start=\"287\" data-end=\"633\"\u003eQ8 Wagner NST 68 is a top-quality slideway oil with strong tackiness properties. Specially developed to perform outstandingly in environments where water-based cutting fluids are used under high pressure. The oil protects machine components against wear and corrosion, and works perfectly alongside water-based metalworking fluids.\u003c\/p\u003e\n\u003ch3 data-start=\"635\" data-end=\"651\"\u003eApplications\u003c\/h3\u003e\n\u003cp data-start=\"652\" data-end=\"826\"\u003eThis oil is ideal for vertical slideways in machine tools. Also suitable for systems that call for CLP (industrial gear oils) or HLP (hydraulic oils).\u003c\/p\u003e\n\u003ch3 data-start=\"828\" data-end=\"855\"\u003eKey benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"858\" data-end=\"894\"\u003eLess downtime thanks to improved lubrication\u003c\/li\u003e\n\u003cli data-start=\"897\" data-end=\"930\"\u003eAdheres excellently to surfaces\u003c\/li\u003e\n\u003cli data-start=\"933\" data-end=\"975\"\u003eResistant to splashing cutting fluids\u003c\/li\u003e\n\u003cli data-start=\"978\" data-end=\"1005\"\u003eSuperior water separation\u003c\/li\u003e\n\u003cli data-start=\"1008\" data-end=\"1046\"\u003eExcellent protection against corrosion\u003c\/li\u003e\n\u003cli data-start=\"1049\" data-end=\"1107\"\u003eReduces the need for multiple types of lubricant\u003c\/li\u003e\n\u003cli data-start=\"1110\" data-end=\"1133\"\u003eTop-class wear protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"1315\" data-end=\"1348\"\u003eSpecifications \u0026amp; properties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"1351\" data-end=\"1379\"\u003eISO viscosity grade: 68\u003c\/li\u003e\n\u003cli data-start=\"1382\" data-end=\"1432\"\u003eDIN standards: 51524-2 HLP, 51502 CGLP, 51517-3 CLP\u003c\/li\u003e\n\u003cli data-start=\"1435\" data-end=\"1456\"\u003eANSI\/AGMA: 9005-E02\u003c\/li\u003e\n\u003cli data-start=\"1459\" data-end=\"1472\"\u003eISO 6743-13\u003c\/li\u003e\n\u003cli data-start=\"1475\" data-end=\"1511\"\u003eFZG test: A\/8.3\/90 – load stage 12\u003c\/li\u003e\n\u003cli data-start=\"1514\" data-end=\"1571\"\u003eCarbon Footprint (PCF): 1.23 kg CO₂eq\/kg (cradle-to-gate)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"1573\" data-end=\"1598\"\u003ePhysical properties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"1622\" data-end=\"1658\"\u003e\n\u003cstrong data-start=\"1622\" data-end=\"1644\"\u003eDensity at 15°C\u003c\/strong\u003e: 0.876 g\/ml\u003c\/li\u003e\n\u003cli data-start=\"1661\" data-end=\"1697\"\u003e\n\u003cstrong data-start=\"1661\" data-end=\"1683\"\u003eViscosity @ 40°C\u003c\/strong\u003e: 68.0 mm²\/s\u003c\/li\u003e\n\u003cli data-start=\"1700\" data-end=\"1737\"\u003e\n\u003cstrong data-start=\"1700\" data-end=\"1723\"\u003eViscosity @ 100°C\u003c\/strong\u003e: 8.75 mm²\/s\u003c\/li\u003e\n\u003cli data-start=\"1740\" data-end=\"1768\"\u003e\n\u003cstrong data-start=\"1740\" data-end=\"1761\"\u003eViscosity index\u003c\/strong\u003e: 101\u003c\/li\u003e\n\u003cli data-start=\"1771\" data-end=\"1792\"\u003e\n\u003cstrong data-start=\"1771\" data-end=\"1783\"\u003ePour point\u003c\/strong\u003e: -12°C\u003c\/li\u003e\n\u003cli data-start=\"1795\" data-end=\"1822\"\u003e\n\u003cstrong data-start=\"1795\" data-end=\"1813\"\u003eFlash point (COC)\u003c\/strong\u003e: 220°C\u003c\/li\u003e\n\u003cli data-start=\"1825\" data-end=\"1856\"\u003e\n\u003cstrong data-start=\"1825\" data-end=\"1844\"\u003eRust test (24 h)\u003c\/strong\u003e: pass\u003c\/li\u003e\n\u003cli data-start=\"1859\" data-end=\"1898\"\u003e\n\u003cstrong data-start=\"1859\" data-end=\"1892\"\u003eCopper corrosion (3 h at 100°C)\u003c\/strong\u003e: 1A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1702\" data-end=\"1847\"\u003ePlease note: tackiness additives can block filter systems, such as Bejur filters. In that case, the \u003cstrong data-start=\"1830\" data-end=\"1846\"\u003eQ8 Wagner NS\u003c\/strong\u003e is the better choice.\u003c\/p\u003e\n\u003cp data-start=\"1702\" data-end=\"1847\"\u003e \u003c\/p\u003e\n\u003cp data-start=\"1702\" data-end=\"1847\"\u003e\u003cstrong\u003eClick here for the \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/9232\/7944\/files\/Q8-Wagner-NST-68_nl.pdf?v=1757053766\"\u003ePDS\u003c\/a\u003e and \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/9232\/7944\/files\/Q8-Wagner-NST-68_nl_1.pdf?v=1757053779\"\u003eMSDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Q8","offers":[{"title":"20L","offer_id":52355534946568,"sku":"Q8wagner68-20","price":129.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/9232\/7944\/files\/q8_wagner_nst_68.webp?v=1757053856"},{"product_id":"houghto-safe-620ep","title":"Houghto-Safe 620EP","description":"\u003ch2 data-start=\"218\" data-end=\"272\"\u003eSafe hydraulic operation in high-risk environments\u003c\/h2\u003e\n\u003cp data-start=\"274\" data-end=\"583\"\u003eThis high-quality water-containing hydraulic oil is specially developed for applications where there is a risk of fire. Think of environments involving open flames, hot surfaces or molten metals. The oil greatly reduces the risk of fire, without compromising on lubrication or reliability.\u003c\/p\u003e\n\u003cp data-start=\"585\" data-end=\"757\"\u003eHoughto-Safe 620 E has been used worldwide for more than 50 years in heavy industries such as steel and aluminium production, die casting, glass manufacturing and plastics processing.\u003c\/p\u003e\n\u003ch3 data-start=\"759\" data-end=\"775\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"778\" data-end=\"829\"\u003eHydraulic systems with strict fire-safety requirements\u003c\/li\u003e\n\u003cli data-start=\"832\" data-end=\"895\"\u003eSuitable for steel, copper, brass and anodised aluminium\u003c\/li\u003e\n\u003cli data-start=\"898\" data-end=\"959\"\u003eIdeal for foundries and the glass and metal industries, among others\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"961\" data-end=\"974\"\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"977\" data-end=\"1011\"\u003eDrastically reduces fire risk\u003c\/li\u003e\n\u003cli data-start=\"1014\" data-end=\"1052\"\u003eImproves personnel safety\u003c\/li\u003e\n\u003cli data-start=\"1055\" data-end=\"1098\"\u003eCan help lower insurance costs\u003c\/li\u003e\n\u003cli data-start=\"1101\" data-end=\"1144\"\u003eReliable operation at high temperatures\u003c\/li\u003e\n\u003cli data-start=\"1147\" data-end=\"1208\"\u003ePrevents cavitation and air entrainment thanks to low foaming\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"1210\" data-end=\"1243\"\u003eSpecifications \u0026amp; properties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"1246\" data-end=\"1281\"\u003eISO6743-4 Type HFC (water-glycol)\u003c\/li\u003e\n\u003cli data-start=\"1284\" data-end=\"1326\"\u003eUse as supplied, do not dilute\u003c\/li\u003e\n\u003cli data-start=\"1329\" data-end=\"1406\"\u003eMeets ISO20763 (Vickers V104 Vane Pump): \u0026lt;100 mg wear at 140 bar\u003c\/li\u003e\n\u003cli data-start=\"1409\" data-end=\"1446\"\u003eCorrosion resistant to ISO4404-1\u003c\/li\u003e\n\u003cli data-start=\"1449\" data-end=\"1501\"\u003eAnti-rust protection even in partially filled systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"1503\" data-end=\"1528\"\u003ePhysical properties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"1531\" data-end=\"1569\"\u003e\n\u003cstrong data-start=\"1531\" data-end=\"1544\"\u003eAppearance\u003c\/strong\u003e: clear red liquid\u003c\/li\u003e\n\u003cli data-start=\"1572\" data-end=\"1611\"\u003e\n\u003cstrong data-start=\"1572\" data-end=\"1603\"\u003eSpecific gravity @ 15.5°C\u003c\/strong\u003e: 1.08\u003c\/li\u003e\n\u003cli data-start=\"1614\" data-end=\"1627\"\u003e\n\u003cstrong data-start=\"1614\" data-end=\"1620\"\u003epH\u003c\/strong\u003e: 9.8\u003c\/li\u003e\n\u003cli data-start=\"1630\" data-end=\"1653\"\u003e\n\u003cstrong data-start=\"1630\" data-end=\"1646\"\u003eWater content\u003c\/strong\u003e: 40%\u003c\/li\u003e\n\u003cli data-start=\"1656\" data-end=\"1688\"\u003e\n\u003cstrong data-start=\"1656\" data-end=\"1678\"\u003eViscosity @ 40°C\u003c\/strong\u003e: 39 cSt\u003c\/li\u003e\n\u003cli data-start=\"1691\" data-end=\"1723\"\u003e\n\u003cstrong data-start=\"1691\" data-end=\"1713\"\u003eViscosity @ 20°C\u003c\/strong\u003e: 90 cSt\u003c\/li\u003e\n\u003cli data-start=\"1726\" data-end=\"1748\"\u003e\n\u003cstrong data-start=\"1726\" data-end=\"1738\"\u003ePour point\u003c\/strong\u003e: -45 °C\u003c\/li\u003e\n\u003cli data-start=\"1751\" data-end=\"1782\"\u003e\n\u003cstrong data-start=\"1751\" data-end=\"1763\"\u003eFlash point\u003c\/strong\u003e: none (ASTM D92)\u003c\/li\u003e\n\u003cli data-start=\"1785\" data-end=\"1852\"\u003e\n\u003cstrong data-start=\"1785\" data-end=\"1798\"\u003eFire point\u003c\/strong\u003e: none (ASTM D92)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eClick here for the\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/9232\/7944\/files\/TDS_HOUGHTO-SAFE_620_E_EN.pdf?v=1757054694\"\u003e PDS\u003c\/a\u003e and \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/9232\/7944\/files\/manual_4.pdf?v=1757054694\"\u003eMSDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"FYOIL","offers":[{"title":"204L","offer_id":52355615326472,"sku":"01.00605-210L","price":1133.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/9232\/7944\/files\/hou_drum_pail_1_1_20874ba3-4178-4b62-acf9-111792f996d5.webp?v=1757055069"},{"product_id":"eni-arnica-68","title":"Eni Arnica 68","description":"\u003ch2\u003eA low-zinc ISO VG 68 hydraulic oil for high-pressure systems\u003c\/h2\u003e\n\u003cp\u003eEni Arnica 68 is an anti-wear hydraulic oil for modern industrial and mobile hydraulic systems running at high pressure. It is built on carefully selected base oils with low-zinc additive technology, which gives good thermal stability and resistance to oxidation and ageing.\u003c\/p\u003e\n\u003cp\u003eWith a viscosity index of 148 the oil copes with cold starts as well as high operating temperatures, so it is a sound choice for marine use and for industrial machines that are sensitive to temperature swings.\u003c\/p\u003e\n\u003ch3\u003eWhere it fits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-pressure hydraulic circuits, outdoors (marine, mobile equipment) or indoors\u003c\/li\u003e\n\u003cli\u003eSystems with fine filtration down to 3 microns\u003c\/li\u003e\n\u003cli\u003eInstallations where temperatures vary widely\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProtects pumps and components against wear, with long oxidation life for extended drain intervals\u003c\/li\u003e\n\u003cli\u003eReleases air quickly, which limits cavitation and aeration, and separates water and foam well\u003c\/li\u003e\n\u003cli\u003eCompatible with the metals normally found in hydraulic systems\u003c\/li\u003e\n\u003cli\u003eClear appearance, density 883 kg\/m³ at 15 °C, 68.0 mm²\/s at 40 °C\u003c\/li\u003e\n\u003cli\u003eFlash point (COC) 222 °C, pour point -33 °C, demulsibility 15 min at 54 °C, cleanliness ISO 4406 19\/17\/15\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications (per manufacturer)\u003c\/h3\u003e\n\u003cp\u003eStandards: DIN 51524-3 HVLP, ISO 11158 HV, AFNOR NF E 48603 HV, CETOP RP 91 H HV, BS 4231 HSE and AISE 127. Builders: Rexroth (document RD 90220-01, edition 12.10), Denison (levels HF-2, HF-1 and HF-0), Eaton Vickers (M-2950-S and I-286-S), Fives Cincinnati (P-69), Sauer Danfoss (520L0463), Danieli (standard 0.000.001 rev. 15) and Linde.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right oil\u003c\/h3\u003e\n\u003cp\u003eUse this grade where the system builder asks for ISO VG 68 HV hydraulic oil. Check the exact approval in the machine manual and flush or drain thoroughly before a changeover.\u003c\/p\u003e\n\u003cp\u003eData sheets: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/9232\/7944\/files\/2533_ENU.pdf?v=1757061804\"\u003ePDS\u003c\/a\u003e and \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/9232\/7944\/files\/MSDS2533_Eni_Arnica_68.pdf?v=1757061805\"\u003eMSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Eni","offers":[{"title":"20L","offer_id":52357094834440,"sku":"253350","price":110.11,"currency_code":"EUR","in_stock":true},{"title":"55L","offer_id":52357094867208,"sku":"253330","price":263.3,"currency_code":"EUR","in_stock":true},{"title":"205L","offer_id":52357094899976,"sku":"253311","price":705.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/9232\/7944\/files\/hydraulische-olie-eni-arnica-68_2.webp?v=1757061989"},{"product_id":"fuchs-cassida-gl-150","title":"Fuchs Cassida GL 150","description":"\u003ch2 data-start=\"347\" data-end=\"411\"\u003eFood-grade gear oil for demanding operating conditions\u003c\/h2\u003e\n\u003cp data-start=\"413\" data-end=\"861\"\u003eLooking for a food-grade gear oil that is both H1 registered and delivers serious EP protection? This synthetic GL 150 is made for enclosed gearboxes in the food \u0026amp; beverage and packaging industries. The formulation is NSF H1 registered and ISO 21469 certified, and is produced under HACCP and GMP quality systems. That means you can use it safely wherever incidental food contact may occur, without compromising on performance.\u003c\/p\u003e\n\u003ch3 data-start=\"863\" data-end=\"879\"\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"882\" data-end=\"948\"\u003eEnclosed gearboxes in food and beverage production\u003c\/li\u003e\n\u003cli data-start=\"951\" data-end=\"989\"\u003eDrives in packaging machinery\u003c\/li\u003e\n\u003cli data-start=\"992\" data-end=\"1126\"\u003eSuitable for steel-on-steel as well as worm\/phosphor bronze gear sets thanks to strong EP properties\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"1128\" data-end=\"1141\"\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"1144\" data-end=\"1191\"\u003eHigh oxidation stability for long service life\u003c\/li\u003e\n\u003cli data-start=\"1194\" data-end=\"1218\"\u003eNeutral odour and taste\u003c\/li\u003e\n\u003cli data-start=\"1221\" data-end=\"1296\"\u003eHigh viscosity index: stable lubrication across a wide temperature range\u003c\/li\u003e\n\u003cli data-start=\"1299\" data-end=\"1385\"\u003eNSF H1 \u0026amp; ISO 21469, Kosher and Halal listings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"1387\" data-end=\"1420\"\u003eSpecifications \u0026amp; properties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"1423\" data-end=\"1456\"\u003eNSF H1 registered, ISO 21469\u003c\/li\u003e\n\u003cli data-start=\"1459\" data-end=\"1492\"\u003eDIN 51517 CLP; ISO 6743-6 L-CKD\u003c\/li\u003e\n\u003cli data-start=\"1495\" data-end=\"1539\"\u003eDIN 51506 VBL\/VCL applicable to GL 150\u003c\/li\u003e\n\u003cli data-start=\"1542\" data-end=\"1561\"\u003eFZG A\/8.3\/90: \u0026gt;12\u003c\/li\u003e\n\u003cli data-start=\"1564\" data-end=\"1651\"\u003eProduct family: synthetic food-grade gear oils\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"1653\" data-end=\"1678\"\u003ePhysical properties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"1681\" data-end=\"1714\"\u003e\n\u003cstrong data-start=\"1681\" data-end=\"1690\"\u003eColour\u003c\/strong\u003e: colourless\/light yellow\u003c\/li\u003e\n\u003cli data-start=\"1717\" data-end=\"1750\"\u003e\n\u003cstrong data-start=\"1717\" data-end=\"1737\"\u003eDensity @ 15°C\u003c\/strong\u003e: 845 kg\/m³\u003c\/li\u003e\n\u003cli data-start=\"1753\" data-end=\"1788\"\u003e\n\u003cstrong data-start=\"1753\" data-end=\"1775\"\u003eViscosity @ 40°C\u003c\/strong\u003e: 150 mm²\/s\u003c\/li\u003e\n\u003cli data-start=\"1791\" data-end=\"1828\"\u003e\n\u003cstrong data-start=\"1791\" data-end=\"1814\"\u003eViscosity @ 100°C\u003c\/strong\u003e: 18.9 mm²\/s\u003c\/li\u003e\n\u003cli data-start=\"1831\" data-end=\"1859\"\u003e\n\u003cstrong data-start=\"1831\" data-end=\"1852\"\u003eViscosity index\u003c\/strong\u003e: 143\u003c\/li\u003e\n\u003cli data-start=\"1862\" data-end=\"1890\"\u003e\n\u003cstrong data-start=\"1862\" data-end=\"1880\"\u003eFlash point (COC)\u003c\/strong\u003e: 268 °C\u003c\/li\u003e\n\u003cli data-start=\"1893\" data-end=\"1951\"\u003e\n\u003cstrong data-start=\"1893\" data-end=\"1905\"\u003ePour point\u003c\/strong\u003e: −54 °C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eClick here for the \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/9232\/7944\/files\/TDS-CASSIDA-FLUID-GL-SERIES-ENG.pdf?v=1757072169\"\u003ePDS \u003c\/a\u003eand \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/9232\/7944\/files\/Fuchs_Lubricants_Germany_GmbH_CASSIDA_FLUID_GL_150_CP1000784_12-19-2023_English.pdf?v=1757072168PDS\"\u003eMSDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Fuchs","offers":[{"title":"22L","offer_id":52358045958408,"sku":"550016079-22","price":418.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/9232\/7944\/files\/oil-cassida-fluid-gl-150-22l-fuchs-full.webp?v=1757072352"}],"url":"https:\/\/www.fyoil.com\/collections\/industrial-hydraulic-oils.oembed","provider":"FYOIL — Premium Lubricants, Motor Oils \u0026 Technical Fluids","version":"1.0","type":"link"}