{"title":"Greases","description":"\u003cp\u003eGrease is oil held in a thickener so it stays where it is applied. That makes it the lubricant of choice for wheel bearings, chassis joints, bushings, open gears and any component that cannot be fed by an oil circulation system. Choosing the right grease depends on consistency, thickener, operating temperature and load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNLGI grade.\u003c\/strong\u003e The NLGI number describes consistency. NLGI 0 and 1 are soft and flow easily, useful for centralised lubrication systems and cold conditions. NLGI 2 is the common general-purpose grade for bearings and chassis points. NLGI 3 is firmer and often chosen for vertical shafts or worn, loose bearings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThickener.\u003c\/strong\u003e Lithium and lithium-complex greases are widely used for general automotive work. Calcium and calcium-sulphonate greases resist water well, which is why they are popular for marine applications. Polyurea and other synthetic thickeners are often used in sealed-for-life bearings. Mixing incompatible thickeners can soften the grease and cause leakage, so clean out old grease when changing type.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEP additives.\u003c\/strong\u003e Extreme-pressure (EP) greases contain additives that protect surfaces under shock loads and heavy pressure, for example in heavily loaded joints or slow, high-torque machinery.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnvironmental grades.\u003c\/strong\u003e Biodegradable greases are formulated for equipment used near water or in sensitive areas. Compare the details in each product description, apply with a grease gun until fresh grease appears at the seal, and avoid over-filling sealed bearings.\u003c\/p\u003e","products":[{"product_id":"shell-panolin-s5-grease-eal-v120p-2","title":"Shell Panolin S5 Grease EAL V120P 2","description":"\u003ch2\u003eA biodegradable ester-based grease for marine and industrial use\u003c\/h2\u003e\n\u003cp\u003eShell's Panolin S5 EAL grease (V120P 2) is a fully synthetic, biodegradable grease with an ester base oil and a lithium hydroxystearate thickener. It carries extreme-pressure, anti-oxidation, anti-wear and anti-rust additives and is meant for places where leaks or spills must not harm the environment, such as vessels and industrial plant.\u003c\/p\u003e\n\u003cp\u003eThe product is certified with the EU Ecolabel (NL\/027\/019), complies with the US EPA 2013 Vessel General Permit and meets the USDA BioPreferred programme. The working range is -35 °C to +100 °C, tolerating peaks of +120 °C.\u003c\/p\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlain and rolling bearings\u003c\/li\u003e\n\u003cli\u003eGeneral industrial lubrication\u003c\/li\u003e\n\u003cli\u003eEquipment that needs biodegradability and low ecotoxicity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNLGI 2, cone penetration 280 (0.1 mm) at 25 °C\u003c\/li\u003e\n\u003cli\u003eBase oil viscosity 120 mm²\/s at 40 °C and 19 mm²\/s at 100 °C\u003c\/li\u003e\n\u003cli\u003eDropping point 180 °C\u003c\/li\u003e\n\u003cli\u003eApprovals also listed: Rolls-Royce Marine and Becker Marine Systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoosing the right grease\u003c\/h3\u003e\n\u003cp\u003eUse it where an environmentally acceptable lubricant (EAL) is required by the vessel, port or site. Whenever a machine has its own OEM demands, ask the manufacturer first, and clean out old grease before changing over. Because this grease is lithium-based, keep it away from systems that were filled with incompatible thickeners.\u003c\/p\u003e\n\u003cp\u003eData sheets: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/9232\/7944\/files\/111435ed-83c0-498f-bb7b-a436ea3b4090.pdf?v=1756993627\"\u003ePDS and MSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"FYOIL","offers":[{"title":"400GR","offer_id":52349614948616,"sku":"909527","price":14.03,"currency_code":"EUR","in_stock":true},{"title":"18KG","offer_id":52349614981384,"sku":"909177","price":505.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/9232\/7944\/files\/SHELL-PANOLIN-400G.webp?v=1756993753"},{"product_id":"eurol-lube-pl","title":"Eurol Lube PL","description":"\u003ch2\u003eA dry film lubricant for open lubrication points\u003c\/h2\u003e\n\u003cp\u003eEurol Lube PL is a multi-purpose dry-film lubricant based on Eurol SYNGIS technology, available as a spray and as a liquid. It leaves a thin, dry film that keeps lubricating without collecting sand, dust or dirt, which makes it useful on parts that sit exposed to the elements.\u003c\/p\u003e\n\u003cp\u003eIt lubricates, cleans and protects in one step, also when the part is damp or already corroded, and can help free seized components.\u003c\/p\u003e\n\u003ch3\u003eTypical uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOpen lubrication points such as couplings, bearings and hinges\u003c\/li\u003e\n\u003cli\u003eCables and conveyor tracks\u003c\/li\u003e\n\u003cli\u003eAnywhere a dry, dirt-repellent film is needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnti-wear and anti-corrosion protection\u003c\/li\u003e\n\u003cli\u003eDisplaces moisture and repels water\u003c\/li\u003e\n\u003cli\u003eVery low friction, which lowers energy use\u003c\/li\u003e\n\u003cli\u003eEconomical in use\u003c\/li\u003e\n\u003cli\u003eYellow, density 0.94 kg\/l at 20 °C, viscosity index 193\u003c\/li\u003e\n\u003cli\u003eOperating range from -40 °C up to +170 °C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003cp\u003eApply a thin, even coat to a clean surface and let it dry. A second light pass is better than one heavy one, because a thick layer attracts more grime than a thin one.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right product\u003c\/h3\u003e\n\u003cp\u003ePick a dry-film lubricant like this one when a wet grease would pick up dust and turn into a grinding paste, for example on exposed chains, sliding gates or conveyor parts. For sealed, heavily loaded bearings a grease is the better answer.\u003c\/p\u003e\n\u003cp\u003eData sheets: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/9232\/7944\/files\/NL_S009101AER_PI.pdf?v=1757063786\"\u003ePDS\u003c\/a\u003e and \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/9232\/7944\/files\/NL_S009101AER_SDS.pdf?v=1757063786\"\u003eMSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Eurol","offers":[{"title":"400ML","offer_id":52357505286408,"sku":"S009101AER-st","price":21.72,"currency_code":"EUR","in_stock":true},{"title":"5L","offer_id":52357505319176,"sku":"S009101-5","price":135.94,"currency_code":"EUR","in_stock":true},{"title":"20L","offer_id":52357505351944,"sku":"S009101-20","price":535.06,"currency_code":"EUR","in_stock":true},{"title":"210L","offer_id":52357505384712,"sku":"S009101-210","price":5564.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/9232\/7944\/files\/Schermafbeelding_2025-09-05_112445_resized.webp?v=1757065373"},{"product_id":"kluber-staburags-nbu-8-ep","title":"Klüber staburags NBU 8 EP","description":"\u003ch2\u003eA barium-complex grease for heavily loaded rolling bearings\u003c\/h2\u003e\n\u003cp\u003eKlüber STABURAGS NBU 8 EP is a long-life grease for rolling bearings under high specific loads. It combines a mineral base oil with a barium-complex thickener and is water-resistant. It gives EP and wear protection and guards against corrosion and tribo-corrosion.\u003c\/p\u003e\n\u003cp\u003eKlüber reports that it was tested to SKF R2F (run B, 140 °C) and reached around 4,000 hours in the SKF ROF test at 120 °C.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRolling bearings with high loads, including tapered roller bearings\u003c\/li\u003e\n\u003cli\u003eTraction motors, axle bearings, electric motors and pumps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNLGI 2, brown, registered NSF H2 (135684)\u003c\/li\u003e\n\u003cli\u003eTemperature range -20 °C to +140 °C\u003c\/li\u003e\n\u003cli\u003eDensity about 0.99 g\/cm³ at 20 °C, drop point at least 220 °C\u003c\/li\u003e\n\u003cli\u003eWorked penetration 265 to 295 (0.1 mm) at 25 °C\u003c\/li\u003e\n\u003cli\u003eBase oil viscosity about 97 mm²\/s at 40 °C and 11.5 mm²\/s at 100 °C\u003c\/li\u003e\n\u003cli\u003eShear viscosity at 25 °C (300 s⁻¹) between 5,500 and 9,500 mPa·s\u003c\/li\u003e\n\u003cli\u003eSpeed factor n·dm of about 500,000 mm\/min\u003c\/li\u003e\n\u003cli\u003eShelf life about 60 months unopened\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoosing the right grease\u003c\/h3\u003e\n\u003cp\u003eChoose it where the bearing maker or machine manual asks for an NLGI 2 grease with strong EP properties and the operating temperature stays within the stated range. Do not mix with greases of a different thickener type without a compatibility check, and clean the bearing well when switching.\u003c\/p\u003e\n\u003cp\u003eData sheets: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/9232\/7944\/files\/kluber_staburags_nbu_8_ep_en.pdf?v=1757074499\"\u003ePDS\u003c\/a\u003e and \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/9232\/7944\/files\/klueber-staburags-nbu-8-ep-rolling-bearing-high-pressure-grease-datasheet.pdf?v=1757074499\"\u003eMSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Klüber","offers":[{"title":"400GR","offer_id":52358220611848,"sku":"974000","price":114.5,"currency_code":"EUR","in_stock":true},{"title":"1KG","offer_id":52358220644616,"sku":"902652","price":399.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/9232\/7944\/files\/1221963_Klueber-Staburags-NBU-8-EP-Kartusche-400g_0171050591_H_600x600_transparent-removebg-preview.png?v=1757075173"},{"product_id":"eurol-marine-grease-ep-2-3","title":"Eurol Marine Grease EP 2\/3","description":"\u003ch2\u003eA water-resistant grease for propeller shafts and bearings on board\u003c\/h2\u003e\n\u003cp\u003eEurol Marine Grease, grade EP 2\/3, is a brown, mineral-oil grease with a calcium-lithium thickener, made for use on boats and ships. The mixed soap gives a balance of water resistance and mechanical stability, which suits stern tubes, shaft bearings and other lubrication points on board.\u003c\/p\u003e\n\u003cp\u003eThe grease works in fresh and salt water, is gentle on seals and pumps easily in standard grease pumps. It keeps rust, wear and oxidation at bay for a long time.\u003c\/p\u003e\n\u003ch3\u003eKey data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNLGI consistency 2-3, thickener calcium-lithium, mineral base oil\u003c\/li\u003e\n\u003cli\u003eBase oil with a viscosity of 465 cSt\u003c\/li\u003e\n\u003cli\u003eOperating temperature -20 °C to +120 °C, dropping point 180 °C\u003c\/li\u003e\n\u003cli\u003eFlash point 150 °C, density 0.92 kg\/l at 20 °C\u003c\/li\u003e\n\u003cli\u003e4-ball weld load 320 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplying it\u003c\/h3\u003e\n\u003cp\u003ePump it in until fresh grease appears at the seal or relief point, and top up at the interval the equipment maker gives.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right grease\u003c\/h3\u003e\n\u003cp\u003eChoose a grease like this where parts are splashed or submerged and a wash-out resistant film matters. Check the grade the equipment builder specifies, since some stern-tube systems and propeller shaft seals call for a particular NLGI class or a particular type of grease. Do not mix it with greases that have a different thickener unless compatibility is confirmed.\u003c\/p\u003e\n\u003cp\u003eData sheets: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/9232\/7944\/files\/NL_E901160_PI.pdf?v=1787048614\"\u003ePDS\u003c\/a\u003e and \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/9232\/7944\/files\/manual_14.pdf?v=1787048613\"\u003eMSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Eurol","offers":[{"title":"400GR normaal patroon","offer_id":58464613794056,"sku":"E901160-st","price":7.32,"currency_code":"EUR","in_stock":true},{"title":"400GR schroef patroon","offer_id":58464613826824,"sku":"E901160-s400gr-st","price":7.52,"currency_code":"EUR","in_stock":true},{"title":"500GR","offer_id":58464613859592,"sku":"E901160-500G","price":11.51,"currency_code":"EUR","in_stock":true},{"title":"5 KG","offer_id":58464613892360,"sku":"E901160-5-kg","price":71.33,"currency_code":"EUR","in_stock":true},{"title":"20 KG","offer_id":58464613925128,"sku":"E901160-20-kg","price":220.46,"currency_code":"EUR","in_stock":true},{"title":"50 KG","offer_id":58464613957896,"sku":"E901160-50","price":454.35,"currency_code":"EUR","in_stock":true},{"title":"180 KG","offer_id":58464613990664,"sku":"E901160-180","price":1566.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/9232\/7944\/files\/e901160-400g.webp?v=1787048636"}],"url":"https:\/\/www.fyoil.com\/collections\/greases.oembed","provider":"FYOIL — Premium Lubricants, Motor Oils \u0026 Technical Fluids","version":"1.0","type":"link"}